Timken HM218248 Tapered Roller Bearing Inner Race Assembly Cone, Steel,

S:10.2 mm; C0:20.8 kN; N:16mm; B:41.2 mm; A1:10 mm; Designation of bearing:US209-26G2T20; C:31.85 kN; J:132 mm; e:10 mm; A2:41 mm;

da max:39 mm; Da min:55 mm; a:18.6 mm; d1:52.4 mm; Characteristic cage frequency, FTF:0.42 Hz; Rating life coefficient, A2:1; Mass:0.39 kg; r1a max:1.5 mm; db min:38.5 mm; Min operating temperature, Tmin:-40 °C;

L:135 mm; s1:36.55 mm; T min.:-20 °C; B:38.1 mm; Designation of housing:F307-; Weight:2.16 kg; A1:16 mm; C0:19.2 kN; e:20 mm; A:36 mm;

N:41mm; L:224 mm; C:57.2 kN; T min.:-40 °C; A5:39.7 mm; s1:32.55 mm; G:M6x1; H:167 mm; Weight:6.76 kg; A:70 mm;

N1:24.5 mm; s1:19.05 mm; H1:14.5 mm; d:30.16 mm; Designation of open end cover:SCOU206-19; A:41.5 mm; B:38.1 mm; C:19.5 kN; G:M6x1; C0:11.2 kN;

Nlim (grease):7,800 rpm; Min operating temperature, Tmin:-25 °C; Mass:0.4 kg; da max:55.5 mm; Fatigue limit load, Cu:0.93 kN; d:45 mm; da min:51.5 mm; Characteristic cage frequency, FTF:0.4 Hz; Radial clearance class:C3; Static load, C0:20.4 kN;

N:41mm; L:224 mm; C:57.2 kN; T min.:-40 °C; A5:39.7 mm; s1:32.55 mm; G:M6x1; H:167 mm; Weight:6.76 kg; A:70 mm;

H1:28.6 mm; A1:50.8 mm; d:57.15 mm; T max.:100 °C; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Weight:5.37 kg; L:245 mm; H:68.3 mm; Designation of housing:PLE212N-;

Nlim (grease):7,800 rpm; Min operating temperature, Tmin:-25 °C; Mass:0.4 kg; da max:55.5 mm; Fatigue limit load, Cu:0.93 kN; d:45 mm; da min:51.5 mm; Characteristic cage frequency, FTF:0.4 Hz; Radial clearance class:C3; Static load, C0:20.4 kN;

L:135 mm; s1:36.55 mm; T min.:-20 °C; B:38.1 mm; Designation of housing:F307-; Weight:2.16 kg; A1:16 mm; C0:19.2 kN; e:20 mm; A:36 mm;

L:135 mm; s1:36.55 mm; T min.:-20 °C; B:38.1 mm; Designation of housing:F307-; Weight:2.16 kg; A1:16 mm; C0:19.2 kN; e:20 mm; A:36 mm;

da max:39 mm; Da min:55 mm; a:18.6 mm; d1:52.4 mm; Characteristic cage frequency, FTF:0.42 Hz; Rating life coefficient, A2:1; Mass:0.39 kg; r1a max:1.5 mm; db min:38.5 mm; Min operating temperature, Tmin:-40 °C;

H1:28.6 mm; A1:50.8 mm; d:57.15 mm; T max.:100 °C; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Weight:5.37 kg; L:245 mm; H:68.3 mm; Designation of housing:PLE212N-;

N:41mm; L:224 mm; C:57.2 kN; T min.:-40 °C; A5:39.7 mm; s1:32.55 mm; G:M6x1; H:167 mm; Weight:6.76 kg; A:70 mm;

H1:28.6 mm; A1:50.8 mm; d:57.15 mm; T max.:100 °C; C0:32.8 kN; Recommended tightening torque for set screw:16.8 Nm; Weight:5.37 kg; L:245 mm; H:68.3 mm; Designation of housing:PLE212N-;